3 RCA component / F connector Wall Plate (RGB componet + F connector)
Red/Green/Blue Component for video
F connector for video

Connector Type : Coupler

This is CL2 rate cable for In-Wall Installation
See The Big Picture is proud to offer these high quality SVGA Cables. They feature a low loss, double shielded design. Signal integrity is further enhanced by ferrites cores that filter out noise. Come with durable molded connectors with thumbscrews for a secure connection. Great for connecting high resolution analog displays. Comes with a lifetime warrenty for peace of mind.VGA connections are also commonly referred to as HD15, DB15 (a misnomer), PC in/out, RGB and RGBHV.

This adapter converts HDMI Male to DVI Male connector. A DVI to HDMI adapter is used to connect older home theater equipment with DVI connectors to newer HDTV televisions and projectors which have HDMI connectors.

High Bandwidth
All Digital Interconnects and cables
For High Definition video (720p and 1080p) or standard definition
Passes digital video and audio in single cable.
HDMI is backward compatible with DVI.

The USB 2.0 Extension Cable is not a passive cable. It is an active device. The USB signals Going in and out of the extension cable are buffered to assure signal quality and the meeting of the USB's electrical and timing spec. Using passive cables for the purpose of extension Will result in signal errors and is not recommended.

Plug the male side into your computer and then plug your device's usb cable into the female end of this extension cable. So the repeater goes closer to your device, not the computer.

USB extension cable allows an USB device to have its cable length extended 16ft. The USB extension cable acts as a USB hub and buffers all downstream and upstream data traffic. High speed, full-speed and low-speed devices will function equally well with the USB extension cable.

Specifications

• Solid steel construction
• Universal, adjustable mounting system
• Built-in leveling bubble.
• Only a 46mm (1.81") gap between the tv and the wall when folded flat.
• Tilt:  0 ~ 10 degree down.
• Max hole pattern: 420mm wide x 230mm high
• Min hole pattern:  45mm wide x 50mm high
• Max VESA:  400x200
• Max Weight: 75kgs (165 lbs)
• Wall Plate Dimensions:  18" w x 8" h x 1" d
• Mounting Arm Dimentions:  2 1/2" w* x 10 5/8" x 1 5/8" d (* @ it's widest point)
• Fits most displays between 23" and 37"*

This is CL2 rate cable for In-Wall Installation
See The Big Picture is proud to offer these high quality SVGA Cables. They feature a low loss, double shielded design. Signal integrity is further enhanced by ferrites cores that filter out noise. Come with durable molded connectors with thumbscrews for a secure connection. Great for connecting high resolution analog displays. Comes with a lifetime warrenty for peace of mind.VGA connections are also commonly referred to as HD15, DB15 (a misnomer), PC in/out, RGB and RGBHV.

Adjustable Tilting Wall Mount Bracket for LCD Plasma (Max 165Lbs, 37~63inch) (Does NOT Swivel)  Can Be used with ceiling extension.

This is An Adjustable Wall Bracket for LCD, Plasma or other flat panel monitors. This Flat Wall Mount supports most 37" to 63" flat panel screen and plasma TVs up to 165 lb weight.  The mount can rotate up and down , but not side to side.

The slim wall plate keeps the screen close to the wall for a very discreet installation that is perfect for boardrooms, digital signage, or home theaters. The mount includes simple to align brackets and a unique wall plate that can be mounted to a single wood stud, two wood studs, or concrete.

Can be used with ceiling extension.

Compatibility -

Will fit most small to mid-sized flat panel plasma and LCD TVs with mounting patterns up to VESA 750x450.
*Mounting holes on television should be 28" or less apart horizontally & 18.5" or less apart vertically.
Maximum weight capacity: 165lbs/75kg

Dimensions -

Wall plate: 32" x 8 7/8"*
*Measurements are from edge to edge. Mounting points for bolts will be shorter. Please see above.

Range of Motion -

Tilt: o degree to 15 degrees down (variable)
Swivel: None
Extension from wall: 4.0" when parallel to the wall

Design & Construction:

Solid toughened steel construction
Durable scratch resistant finish in Silver
Easy installation.

Included in Box -

Mount
Mounting hardware
User manual

Eliminate the spaghetti behind your entertainment center! With this 3 RCA high graded professional cables will give you the best conductivity signal and quality. You will extract the most from your equipment and eliminate the unsightly mess of wires. For use with video cameras, DVD, VCRs, DSS, High Definition digital TV (HDTV), VCR, DSS, DVD, TV and so on.

High-Definition Multimedia Interface (HDMI) is the first industry-supported, UNCOMPRESSED audio/video interface. This cable connects HDMI devices for DVD, satellite boxes, LCD, projectors, plasma and HDTVs. HDMI provides an interface between any HDMI-enabled audio/video source, such as a set-top box, DVD player, and A/V receiver and an audio and/or video monitor or projector.
HDMI supports standard, enhanced, or high-definition video, plus multi-channel digital audio on a single cable. It transmits all ATSC HDTV standards and supports 8-channel digital audio, with bandwidth to spare to accommodate future enhancements and requirements.

28 AWG 

Optical Toslink cables will provide the BEST QUALITY sound to any dedicated home theater set-up!

This is a new 3FT fiber optic audio optical cable for use Dolby Digital Receiver, Digital Signal Processor, DAT Machines, Divx Player, DVD player, CD player, DSS receiver, DAT player/recorder, MINI Disc player/recorder, Sony Playstation 2, XBox, ALESIS, or any components that use normal full-size TOSLink connectors.